Pool Wall Conduit DSY013

Pool Fittings Pool Wall Conduit DSY013

Pool fittings Pool Wall Conduit DSY013 made of high quality ABS material, and with 300mm length. That can be cut to different lengths, depending on the thickness of the pool wall. Front with 2'' external thread pipe connection and solvent internal ø 50 mm. the rear is 2” external threaded.

Swimming Pool ABS Wall Conduit for Water Circulation Systems

Embedded within swimming pool walls during construction, this conduit serves as a dedicated protective channel for water pipes only (not electrical wiring). It ensures safe, compliant routing of hydraulic components like main drains, return jets, or automatic cleaner lines through the pool shell. Key functions include:

1. Structural Integrity & Leak Prevention

   • Shields pipes from concrete/plaster stress during curing and ground settlement, preventing cracks at penetration points .

   • Creates a sealed tunnel using waterproof epoxy or butyl tape, maintaining the pool’s hydraulic barrier .

   • Allows for thermal expansion/contraction of pipes without compromising the structural bond .

2. Material Specifications

   • Fabricated from schedule 40 PVC (or corrosion-resistant ABS) to withstand pool chemicals and soil pressure .

   • Diameter exceeds pipe size (e.g., 4" conduit for 2" pipe) to facilitate installation and future servicing .

3. Swimming Pool ABS Wall Conduit Installation Protocol

   • Positioned before shotcrete/gunite application, angled 5–10° downward toward equipment pads to prevent water accumulation .

   • Securely anchored with rebar tie-ins to avoid displacement during concrete pouring .

   • Ends sealed post-pipe installation using marine-grade sealants tested for long-term water immersion .

4. Maintenance & Compliance

   • Enables pipe replacement/repairs without destructive excavation .

   • Mandatory separation from electrical conduits per building codes (e.g., IEC 60364-7-702) to prevent cross-system errors .

   • Conduit ends must remain accessible at equipment pads for inspections and blow-out cleaning .

Critical Distinction: Unlike electrical conduits, these sleeves exclusively handle water flow infrastructure. Their design prioritizes hydraulic performance and structural harmony, forming an invisible yet vital layer in the pool’s circulation backbone .

The ribs of the end plates have holes for fitting the wall conduit to the pool structure, which makes assembly straightforward.

Youtube Video：Swimming Pool Wall Conduit DSY013

Other Models：Pool Inlet & Outlet

Pool Wall Conduit DSY013 Specification

Color: Grey Color

Material: ABS

Connection Size: 2'' ext. thread pipe connection+ int. Ø 50 mm

Piece per carton: 50 pieces per carton