Suction Nozzle SV-2827V for Vinyl Pool

Pool Fittings Suction Nozzle SV-2827V for Vinyl Pool

The Suction Nozzle SV-2827V pool fittings is for vinyl pool with 1.5inch inner size and outer size is 2” with screw, the flow rate is 150L/min.

Pool & Spa Suction: How Vinyl Pools Pull Water In

Suction in vinyl swimming pools and spas is how dirty water gets pulled out to be cleaned. Special openings in the pool, connected to pipes and the pump, create this suction.

How it works in vinyl pools:

1. The Pump is the Engine: The pool pump turns on. It creates a strong pull (suction) in the pipes.

2. Water Gets Grabbed: This suction pulls water into the pool through special openings:

   • Skimmers: These boxes built into the pool wall at the waterline. They suck in floating leaves, bugs, and surface water. A basket catches the big stuff.

   • Main Drain(s): This is a covered opening on the bottom of the deep end. It sucks up water, sand, and debris that sink to the floor.

   • Spa Suction Inlets: On vinyl spas, these are usually on the seat or lower wall, pulling water for the jets.

3. Water Travels to Cleaner: The dirty water sucked in travels through underground pipes to the pump. From the pump, it goes to the filter to cleaned.

Special swimming pool & spa Suction for Vinyl Pools:

• Sealed Tight: The suction fittings (like the main drain cover) are specially designed to clamp tightly onto the vinyl liner. This creates a watertight seal so water only goes down the pipe, not behind the liner.

• Protecting the Liner: Main drains often have a flat or slightly domed cover. This helps protect the vinyl liner from damage and ensures smooth suction.

• Safety First: Every suction opening has a strong, approved safety cover or grate. This is incredibly important. The cover prevents the powerful suction from trapping swimmers underwater. Never use the pool if a suction cover is missing, loose, or broken!

• Flexible Connection: Pipes connect securely to the fittings behind the rigid pool wall, under the vinyl liner.

Why it matters:

• Clean Water: Suction is the first step to getting your water filtered and clear.

• Good Circulation: It helps move water around the pool, mixing chemicals and pushing dirt towards the skimmer and drain.

• Spa Jets Work: Suction provides the water needed to power relaxing spa massage jets.

In short: Suction pulls dirty water out of your vinyl pool or spa through safe, sealed openings. This starts the cleaning process and keeps your water healthy and moving. Always keep suction covers secure!

Youtube Video：Suction Nozzle SV-2827V for Vinyl Pool

Other Models：Swimming Pool Fittings

Color: White Color

Material: ABS

Connection Size: 1.5" Solvent; 2''external thread

Piece per carton: 100 pieces per carton